Jiangsu Hai Yi Da Metal Products Co., Ltd
We have the best price and best quality for steel products
Add to Cart
Aluminum Plate for Boat H116/H321 Marine Aluminum Sheet 5083 5000 Series Marine Grade Aluminum Sheet
Brushed aluminum plate(: The manufacturing process of repeatedly scraping the aluminum plate out of the line with sandpaper. The main process of the process is divided into three parts: deesterification, sand mill and water washing. In the aluminum sheet drawing process, the special film technology after anodizing can make a film layer containing the metal component on the surface of the aluminum sheet, and clearly show every fine wire mark, so that the metal matte shines with fine hair. Silky sheen.
Alumina plate: The aluminum plate is formed by placing the aluminum plate in the corresponding electrolyte (such as sulfuric acid, chromic acid, oxalic acid, etc.) as the anode, and performing electrolysis under specific conditions and applied current. The aluminum plate of the anode is oxidized, and a thin layer of aluminum oxide is formed on the surface, the thickness of which is 5 to 20 microns, and the hard anodized film can reach 60 to 200 microns.
PS aluminum plate (advertisement aluminum plate, also known as printed zinc plate, newspaper plate): that is, an aluminum plate with a printed pattern on the back and a thickness of 025 or 03.
Mirror aluminum plate: refers to the aluminum plate that is processed by rolling, grinding and other methods to make the surface of the plate show a mirror effect.
Embossed aluminum plate can also be called aluminum embossed plate: it is an aluminum product that forms various patterns on the surface after calendering on the basis of aluminum plate. It is widely used, mainly used in packaging, construction, curtain wall and so on.
| Product | Alloy Series | Thickness(mm) | Width(mm) | Length(mm) |
| Aluminum Sheet | 1-8 Series | 0.3-6 | 50-2250 | 100-11000mm or by coil |
| Aluminum Coil/Strip | 1-8 Series | 0.3-6 | 50-2250/20-800 | |
| Aluminum Plate | 3,5,6 Series | 6.0-170 | 50-2250 | |
| Aluminum Tread(Checkered) Plate | 1,3,5 Series | 0.8-6.35 | 50-2250 | |
| Can End/Tab Stock | 5052/5182 | 0.15-0.3 | 20-1600 |
| 1)1000 Series Alloy (Generally called commercial pure aluminum,Al>99.0%) | |
| Alloy | 1050 1050A 1060 1070 1100 |
| Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/ H26/H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤30mm; Width≤2600mm; Length≤16000mm OR Coil (C) |
| Application | Lid Stock, Industrial Device, Storage, All Kinds of Containers, etc. |
| Feature | Lid Shigh conductivity, good corrosion resistant performance, high latent heat suitable for heat treatments. |
| 2)3000 Series Alloy (Generally called Al-Mn Alloy, Mn is used as main alloy element) | |
| Alloy | 3003 3004 3005 3102 3105 |
| Temper | O/H111 H112 H12/H22/H32 H14/H24/H34 H16/H26/ H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤30mm; Width≤2200mm Length≤12000mm OR Coil (C) |
| Application | Decoration, heat-sink device, external walls, storage, sheets for construction, etc. |
| Feature | Good rust resistance, not suitable for heat treatments, good corrosion resistant performance, well welding property, good plasticity, low strength but suitable for cold working hardening |
| 3)5000 Series Alloy (Generally called Al-Mg Alloy, the Mg is used as main alloy element) | |
| Alloy | 5005 5052 5083 5086 5182 5754 5154 5454 5A05 5A06 |
| Temper | O/H111 H112 H116/H321 H12/H22/H32 H14/H24/H34 H16/H26/H36 H18/H28/H38 H114/H194, etc. |
| Specification | Thickness≤170mm; Width≤2200mm ; Length≤12000mm |
| Application | Marine Grade Plate, Ring-Pull Can End Stock, Ring-Pull Stock, Automobile Body Sheets, Automobile Inside Board, The Protective Cover On Engine. |
| Feature | All the advantages of normal aluminium alloy, high tensile strength & yield strength, good corrosion resistant performance, well welding property, well fatigue strength, and suitable for anodic oxidation. |
| 4)6000 Series Alloy (Generally called Al-Mg-Si Alloy, the Mg and Si are used as main alloy elements ) | |
| Alloy | 6061 6063 6082 |
| Temper | O F, etc. |
| Specification | Thickness≤170mm; Width≤2200mm ; Length≤12000mm |
| Application | Automotive, Aluminium For Aviation, Industrial Mould, Mechanical Components, Transport Ship, Semiconductor Equipments, etc |
| Feature | Good corrosion resistant performance, well welding property, good oxidability, easy to spray-finishing, well oxidation coloring, good machinability. |